
Panel flagged, full or failing? Free estimates, written quotes, and we handle the permit and FPL.
Nobody wakes up wanting a new electrical panel. Something sends you here, and it's usually one of these.
An inspector or your insurer flagged it. A home sale, an insurance renewal or a 4-point inspection put your panel on a list.
You're adding something big. An EV charger, a hot tub, a bigger AC or a generator, and the panel may be out of room.
The panel is acting up, or it's just old. Tripping breakers, dimming lights, or a box nobody has opened in decades.
You already have a quote. Here's what a panel quote should spell out, and we'll review yours for free.
Heat, buzzing or a burning smell at the panel or meter? Don't read on. Call us now.
A lot of panel calls start with a piece of paper. Many Florida insurers ask for a 4-point inspection on older homes before they write or renew a policy. It covers four systems: the roof, the electrical, the plumbing and the heating and air. On the electrical side, the inspector records the panel's brand, age and condition, and notes hazards such as double-tapped breakers, scorching, corrosion, or a breaker that's the wrong size for its wire. What the insurer does with that report is up to the insurer, and requirements differ from one company to the next.
The names that come up most often are Challenger breakers and Zinsco panels, and Federal Pacific panels are widely flagged too. All three turn up in our own job notes. Depending on what's there, the right fix may be replacing specific breakers or replacing the panel. Before you pay for either, ask your insurer or the buyer's inspector exactly what they need to see. We'd rather you buy the fix that closes the issue than the biggest one on the menu.
Call us with the report or the letter. We'll check what was flagged, show you what we found and explain the options. When the work is done, your invoice documents it, so you have something clear to hand back to the inspector or insurer.
A new large load is often when a panel runs out of room, either physically, with no spaces left for a breaker, or because the service feeding the house is already working hard. Before we add anything, we check whether your panel and service can take it. If they can, it's a new circuit, and our electrical services page covers that. If they can't, a panel replacement or a service upgrade may be the answer, and we'll explain why.
For a whole-home standby generator, we do a full electrical load calculation on your home, as required by code, and the panel is part of that plan. See generator installation.
Most panels do their job quietly for decades. These are the signs that yours deserves a closer look:
Sometimes the fix is smaller than a new panel, like replacing a few worn or flagged breakers. We'll tell you which it is, including "this one's fine, leave it alone" when that's the truth.

Most panel and service replacements need the power company to disconnect the service at the meter, and to reconnect it only after the new work passes inspection. We pull the permit, schedule the disconnect and reconnect with FPL (or Peace River Electric Cooperative where they serve you), and see the inspection through. You don't have to call anyone.
The work itself is a new panel and breakers, and often a new meter can, an outdoor disconnect or a grounding upgrade when the old equipment doesn't meet current code. Most panel replacements take one working day, and larger service upgrades can take two. The start date depends on the permit and the power company's schedule, and we'll give it to you up front.
Replacing the service equipment also brings in a surge protection requirement. Under the 2020 National Electrical Code, which Florida enforces with the 8th edition Florida Building Code (in effect since December 31, 2023), a home's service must have a whole-home surge protective device when the service equipment is installed or replaced (NEC 230.67). The 2023 code, due to take effect with Florida's 9th edition on December 31, 2026, keeps the same rule. More on whole-home surge protection.
If the house needs more capacity, not just a new box, we upgrade the service: the meter can, the outdoor disconnect and the panel together, for example moving a home up to 200-amp service. Whether you need that depends on what the house runs now and what you're adding. A bigger service isn't automatically a better one, and we'll explain our recommendation either way.

Panel and service work is where quotes vary most, and where a shorter quote can leave out the parts that matter. Before you compare totals, compare what each quote actually covers. We'll review another company's quote with you for free. A complete panel quote should spell out:
If a quote replaces the whole panel when the flag was a few breakers, or recommends a 200-amp upgrade, it should say why. And a quote that skips the surge protector on a service replacement is skipping a code requirement, not saving you money. Our technicians are paid hourly, not on commission. For the full list of questions to ask any electrician, see our guide to choosing an electrician in Manatee County.
Estimates are free. Panel replacements and service upgrades are quoted in writing before we start, so you'll know the price before anything happens, and nobody will lean on you to decide today. If you'd rather spread out the cost, see our financing options. Every permit Florida requires is pulled, inspected and closed by us, and our work is covered by our one-year workmanship warranty. That's part of the Simply Better Promise.
A panel or meter that's hot, melting, buzzing or smells like burning can't wait. If there's smoke or fire, get out and call 911 first. Otherwise, call (941) 778-0773. We provide emergency service on nights and weekends. Outside office hours, your call goes to our automated on-call system, which our own technicians respond through. Calls after 9 p.m. are handled the next day.
Air & Energy has served this area since 1983, and everyone we send is an A&E employee. We're a Florida Certified Electrical Contractor, license EC13011350, which you can look up at myfloridalicense.com.
Do I need to replace a Federal Pacific, Zinsco or Challenger panel?
Federal Pacific panels are widely flagged, and Zinsco panels and Challenger breakers come up often on Florida inspections. Depending on what's there, the fix may be new breakers or a new panel. Ask your insurer what it requires, and have an electrician explain the options. Larger work is quoted in writing before it starts.
What does a 4-point inspection check on the electrical system?
The inspector records the panel's brand, age and condition and notes hazards such as double-tapped breakers, scorching, corrosion or mismatched breakers. Each insurer decides what it requires from the report. More on flagged panels.
Does Florida require a surge protector with a new electrical panel?
Yes, when the service equipment is replaced. The 2020 National Electrical Code, which Florida enforces with the 8th edition Florida Building Code, requires a whole-home surge protective device on dwelling services (NEC 230.67), and the 2023 code keeps the rule.
Do I need a 200-amp panel for an EV charger?
Not always. It depends on what your house runs now and whether the panel has room for a dedicated 240-volt circuit. We check before recommending an upgrade.
How long does a panel replacement take?
Most take one working day, and bigger service upgrades can take two. The power is off while we work, and we coordinate the disconnect and reconnect with the power company.
Do you handle the permit and FPL?
Yes. We pull the permit, schedule the disconnect and reconnect with FPL or Peace River Electric Cooperative, and get the inspection closed. You never have to.
How much does an electrical panel upgrade cost?
It depends on the panel, the service size and what else needs updating, like the meter can or grounding. Estimates are free, and you get the price in writing before we start.
Will you review another company's panel quote?
Yes, for free. Here's what a complete quote includes.
Do you serve Lakewood Ranch?
All of Lakewood Ranch, including the Sarasota County side, plus Bradenton, Palmetto, Ellenton, Parrish and the rest of Manatee County.
Tell us what's going on, or what the inspector flagged. Call (941) 778-0773 or request a free panel estimate online.
Panel upgrades, insurance-flagged panels, surge protection, code compliance — the things that separate a safe install from a costly one.